86-535-5617646
No. 1, Kunming Road, Liujiagou Industry Park, Economic And Technological Development Zone, Penglai, Yantai, Shandong, China (Mainland)
High quality heavy calibre Industrial sandblasting hose
Cord sand blast big diameter sandblast hose
Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball
The inside layer is wear-resisting and the outside layer good at anti-aging and wear-resistance. The burst pressure of the hose is four times or more higher than the working pressure.
Inside Diameter(mm) | Outside Diameter(mm) |
Layer | Working Pressure MPa Kgf/cm² | Normal Length | Max Length (m) | |||
Size | Tolerance | Size | Tolerance | M |
Tolerance | |||
19 | ±0.4 | 34 | ±0.8 | 2 | 1.0(10) | 20 | ±1% | 60 |
22 | ±0.4 | 36 | ±0.8 | 2 | 1.0(10) | 20 | ±1% | 60 |
25 | ±0.6 | 39 | ±1.2 | 2 | 1.0(10) | 20 | ±1% | 60 |
32 | ±0.6 | 50 | ±1.2 | 4 | 1.0(10) | 20 | ±1% | 60 |
38 | ±0.8 | 56 | ±1.5 | 4 | 1.0(10) | 20 | ±1% | 60 |
51 | ±0.8 | 70 | ±1.5 | 4 | 1.0(10) | 20 | ±1% | 60 |
64 | ±1.0 | 82 | ±1.5 | 4 | 0.63(6.3) | 20 | ±1% | 40 |
76 | ±1.0 | 95 | ±1.5 | 4 | 0.63(6.3) | 20 | ±1% | 40 |
Wire braided sand Blast big diameter sandblast hose
Used in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with iron ball.
The inner layer is wear-resistance and the outer layer is good at anti-aging and wear-resistance. The hoe can assure high pressure and it will be not deformation . The burst pressure of the hose is four times or higher than the working pressure.
Inside Diameter(mm) | Outside Diameter(mm) | Working Pressure MPa Kgf/cm² | Normal Length | Max Length (m) | |||
Size | Tolerance | Size | Tolerance | M |
Tolerance | ||
25 | ±0.6 | 39 | ±0.8 | 6.9(69) | 20 | ±1% | 40 |
32 | ±0.6 | 50 | ±0.8 | 4.3(43) | 20 | ±1% | 40 |
38 | ±0.8 | 56 | ±1.2 | 3.5(35) | 20 | ±1% | 40 |
51 | ±0.8 | 70 | ±1.2 | 2.6(26) | 20 | ±1% | 40 |
64 | ±1.0 | 82 | ±1.5 | 2.5 (25) | 20 | ±1% | 40 |
76 | ±1.0 | 95 | ±1.5 | 2.5 (25) | 20 | ±1% | 40
|
Wear-resistant suction big diameter sandblast hose
Used to yake out and suction solid materials or grain materials such as mineral sand, bits of coal and cereal(rice, wheat, corn) ect.
The inner layer of the hose is good in flexibility and wear-resistance, while the outer layer is excellently anti-aging and wear-resistance. The hose has the double properties of bearing both the positive and negative pressure can be used normally under the pressure of -80kpa(600mm mercury) at the vacuum. The burst pressure of the hose is four times or higher than the working pressure.
Inside Diameter(mm) |
Layer | Working Pressure MPa Kgf/cm² | Normal Length | Max Length (m) | ||
Size | Tolerance | M | Tolerance | |||
25 | ±0.6 | 4 | 1.0(10) | 20 | ±1% | 60 |
32 | ±0.6 | 4 | 1.0(10) | 20 | ±1% | 60 |
38 | ±0.8 | 4 | 1.0(10) | 20 | ±1% | 60 |
51 | ±0.8 | 4 | 1.0(10) | 20 | ±1% | 60 |
64 | ±1.0 | 4 | 1.0(10) | 20 | ±1% | 40 |
76 | ±1.0 | 4 | 1.0(10) | 20 | ±1% | 40 |
102 | ±1.5 | 4 | 1.0(10) | 20 | ±1% | 40 |
115 | ±1.5 | 4 | 0.63 (6.3) | 20 | ±1% | 20 |
127 | ±1.5 | 4 | 0.63 (6.3) | 20 | ±1% | 20 |
152 | ±1.5 | 6 | 0.63 (6.3) | 20 | ±1% | 20 |
203 | ±2.0 | 6 | 0.63 (6.3) | 10 | ±1% | 10 |
254 | ±2.0 | 8 | 0.63 (6.3) | 10 | ±1% | 10 |
The general package of our products is plastic or woven bag with pallet under the hose.We, however, can also provide special package according to customer's requests.
Penglai Linge Rubber & Plastic Co.,Ltd and Penglai Aofenglian Rubber & Plastic Co.,Ltd was established in 1989, is a professional company mainly for the research, development, design and manufacture of all kinds of big diameter sandblast hose . The area of company is about one hundred and eight mu. The registered trade mark of the products are "DENGFENG", "LINGE", "YUANHONG", "JIAGONG", "AOFENGLIAN"
Our company own advanced production equipment,well-equipped testing,strong innovation and research,strong technical force.All of the products were insured by the Insure Company of Chinese People.
1.Your inquiry related to our product will be replied within 24hours.(E-mail or TM)
2.Well-trained & experienced staff are to answer all your inquiries in English.
3.Your business relationship with us will be confidential to any third party.
4.Good after-sale service offered, please get back if you got question.
5.Welcome to our company.
Our company mainly produces all types of metal-welding and cutting big diameter sandblast hose , air pressure big diameter sandblast hose , water delivery and suction big diameter sandblast hose , oil delivery and suction big diameter sandblast hose , heat-resistant (steam) and suction big diameter sandblast hose , acid (alkali) delivery and suction big diameter sandblast hose , wear-resistant big diameter sandblast hose , wire braid (spiral) hydraulic big diameter sandblast hose , dredging harbor project big diameter sandblast hose , special purpose big diameter sandblast hose .
